rokasgrāmataHP LaserJet Pro P1102

Dansk ............. 13Català ............. 11Español ............. 9Italiano ............. 7Deutsch ............. 5Français ............ 3English .............. 1Norsk .............. 25Lietuvių .......... 23Latviešu .......... 21Suomi ............. 19Eesti ............... 17Nederlands ...... 15Svenska .......... 29Português ....... 27

5. Select a connection method and prepare for software installation

Windows

1. For Windows 7 or lower, do not connect the USB cable before installing

the software. The installation process prompts to connect the cable at

the appropriate time. If the cable is already connected, restart the printer

when installation prompts to connect the cable.

2. Continue to “6. Locate or download the software installation les.”

NOTE: During software installation, select the option to Directly connect

this computer using a USB cable.

Mac

1. Connect the USB cable between the computer and the printer before

installing the software.

2. Continue to “6. Locate or download the software installation les.”

Perform a wireless installation (P1102w wireless models only)

Before starting the installation, verify that the wireless access point is working

correctly. Make sure that the printer, router, and computer are all turned on

and that the computer is connected to the same wireless network you want to

connect the printer to.

If there is not a solid blue light on the top of the printer, go to Process A.

If there is a solid blue light on the top of the printer, go to Process B.

Process A

1. Place the CD in the CD-ROM drive, and then click Install. When the

Printer connections dialog appears, choose Congure to print over

the Wireless Network.

2. Follow the onscreen instructions.

Process B

1. Place the CD in the CD-ROM drive, and then click Install. When the

Printer connections dialog appears, choose Connect to a congured

Wireless Network printer.

2. Follow the onscreen instructions.

3. Select the printer detected by the software. If the printer cannot be

detected by the installer, manually input the printer’s IP address to

continue the installation.

NOTE: Print a Conguration page to nd the printer’s IP address. At

the printer control panel, press and hold the cancel

button for 5

seconds, and then release the cancel

button to print the Conguration

page. TheIP address is listed on the Conguration page in the Network

Information section.

Manually congure the IP address

See the printer User Guide for information on how to manually congure the IP

address www.hp.com/support/ljp1100series.

IMPORTANT:

First, follow

Steps 1 - 3

on the printer hardware

setup poster, then continue

with Step 4 to the right.

www.hp.com/support/ljp1100series www.register.hp.com

LaserJet Pro P1100 series

Getting Started Guide

USB connection directly between the

printer and the computer

Use an A-to-B type USB cable.

4. Initial setup at the control panel

At the printer control panel, check the LED status before beginning software installation.

Cicada_GSG_Reduced_CE651-91091.indd 1 13-01-2015 00:33:28

Rokasgrāmata

Skatiet HP LaserJet Pro P1102 rokasgrāmatu šeit, bez maksas. Šī rokasgrāmata ietilpst kategorijā Printeri, un to novērtēja 4 cilvēki vidēji ar 7.1. Šī rokasgrāmata ir pieejama šādās valodās: Latviešu Valoda, Angļu. Vai jums ir jautājums par HP LaserJet Pro P1102 vai vajag palīdzību? Uzdod savu jautājumu šeit

Satura rādītājs

Untitled

Vajadzīga palīdzība?

Jums ir jautājums par HP LaserJet Pro P1102 un atbilde nav atrodama rokasgrāmatā? Uzdodiet savu jautājumu šeit. Skaidri un visaptveroši raksturojiet problēmu un savu jautājumu. Jo precīzāk raksturosiet savu problēmu un jautājumu, jo vieglāk būs citiem HP LaserJet Pro P1102 īpašniekiem sniegt jums labu atbildi.

Jautājumu skaits: 0